Description

High Pressure – Up to 20psi

Connects to a car socket – 12 Volt

Characteristics

● Voltage: 12 Volt DC
● Inflation flow rate: 100 liters / minute.
● Power: 110W
● Materials: ABS+PA
● Digital pressure adjustment with LCD display screen.
● Flexible reinforced tube with high pressure valve for reliable use.

For a rigid board inflate to 15psi

At a glance…

● With this pump you can inflate anything that has the appropriate valve (H3) by adjusting the air pressure to the desired. Maximum capacity of the pump is 20psi.

● The pump will automatically turn off once it reaches the preset pressure you set.

● The pump has a fuse and will stop working automatically if it overheats. However, do not leave it unattended.

● The time it takes to inflate the board depends on how many liters of air per minute the pump is pumping and the size of the board.

What to watch out for…

● The pump draws in air to inflate. You must be careful where you place the pump while it is working. Do not leave it on the sand or in dirty places and do not block the air ducts. Ideally leave the pump on the SUP while inflating it.

● The pump is not waterproof or shockproof.